Page 1
PS‐3220; Wireless Rotary Motion Battery Replacement Instructions Reference: Battery part number 540‐115; Li‐Poly 300 mAH Step 1: Used a mini flat blade screwdriver to pry off and remove the Qty=4 rubber feet. Place on a non‐stick surface for later reassembly. PASCO Form Number Description Date Revision 013-17360 PS-3220 Battery Replacement Instructions 05-05-22 Page 1 of 3 ...
Page 2
Step 2: Unscrew and remove the 4 Torx Screws with the T6 Screwdriver. Step 3: Lift off the bottom section as shown. Step 4: Remove the battery hold down cover (two screws) with a Torx T5 Screwdriver. Unplug the battery connector. PASCO Form Number Description Date Revision 013-17360 PS-3220 Battery Replacement Instructions 05-05-22 Page 2 of 3 ...
Page 3
Step 5: Remove the old battery and add the replacement battery. Plug in the battery connector and position the wires as shown in the picture above. Reverse all steps to reassemble the unit. Step 6 : Complete the reassembly and dispose of the old battery properly per the instructions. Make sure that the rubber feet are pushed firmly in place. If you need further assistance, please contact Technical Support at support@pasco.com or through www.pasco.com on chat. To access chat through your browser, please enable all cookies on our website. PASCO Form Number Description Date Revision 013-17360 PS-3220 Battery Replacement Instructions 05-05-22 Page 3 of 3 ...