Neenah Paper 9710P0 Manual

LASER PRINTER
Product #
9710P0
1. Print image reversed/mirrored format.
2. Cut paper to fit substrate.
TRANSFERRING INSTRUCTIONS:
1. Place the printed image on top of the mug (imaged side toward the mug).
2. Press: 2 minutes at 250°F.
3. Remove mug from press carefully and run under cold water to peel the paper backing.
4. The mug should be placed in an oven for 10 minutes at 275°F to glaze the toner which will
prevent 'flaking'.
1. Place entire transfer sheet over the product. (Place a piece of plain paper under the product to
assist in picking it up while it is still hot, and to protect the lower platen from overlapping
tonner).
2. Place the "A" pad on top of the transfer and press for 3 minutes at 230°F with medium
pressure.
3. Remove mug from press carefully and run under cold water. Remove paper after cooling.
Neenah Paper Inc.  3460 Preston Ridge Rd., Suite 600  Alpharetta, GA  30005
Customer Service: 800-344-5287  Twitter:
YouTube: www.youtube.com/NeenahHeat
Is designed for use on hard surfaces including mugs, cups, tiles & other
glass, ceramic wood or metal surface.
RECOMMENDATIONS
Fabric Color Hot Peel
Mugs/Tiles
PRINTING INSTRUCTIONS FOR ALL SUBSTRATES:
MUG INSTRUCTIONS
MAGNETS, METALS & LICENSE PLATES INSTRUCTIONS
("A" pad is required)
www.neenah.com/technical/HeatTransfer
MUGS'n MORE
Product # 9710P0
Warm Peel Cold Peel

www.twitter.com/NeenahHeat
 Facebook:
www.facebook.com/NeenahHeat
Hand Iron
