Advertisement
Quick Links
How to set your Belkin SOUNDFORM™ True Wireless Earbuds, AUC001 into
pairing mode
Before you can pair your Belkin SOUNDFORM™ True Wireless Earbuds, AUC001
with your device, they need to be in pairing mode. This article will walk you
through setting your earbuds into pairing mode.
Before you begin
From the factory, your earbuds come in pairing mode. If you just purchased the
earbuds, simply open the charging case and remove the earbuds from it. The
indicator lights on the earbuds will alternate between blue and white.
NOTE: If the indicator lights on your earbuds do not alternate between blue and
white when removed from the case, proceed to the steps below.
Advertisement
Related Manuals for Belkin SOUNDFORM AUC001
Summary of Contents for Belkin SOUNDFORM AUC001
- Page 1 How to set your Belkin SOUNDFORM™ True Wireless Earbuds, AUC001 into pairing mode Before you can pair your Belkin SOUNDFORM™ True Wireless Earbuds, AUC001 with your device, they need to be in pairing mode. This article will walk you through setting your earbuds into pairing mode.
- Page 2 You can now proceed with pairing your earbuds. Click here for instructions. How to pair the Belkin SOUNDFORM™ True Wireless Earbuds, AUC001 Pairing the Belkin SOUNDFORM™ True Wireless Earbuds, AUC001 with your Bluetooth®-enabled mobile device allows you to listen to audio without the use of...
- Page 3 phone or tablet. Before you begin Ensure that your earbuds are removed from the charging case and are in pairing mode. For instructions on how to set your earbuds to pairing mode, click here. NOTE: Your earbuds' lights will alternately flash between blue and white to indicate that both are on pairing mode.
- Page 4 The case of the Belkin SOUNDFORM™ True Wireless Earbuds, AUC001 contains a battery which allows you to charge, no matter where you are, without worrying about finding a power outlet for your earbuds. This article will show you how to charge the Belkin AUC001. Click the links below for specific instructions.
- Page 5 Charging your earbuds Charging the case Charging your earbuds To charge your earbuds, simply open the case and place each earbud in its designated slot and close the lid. If the case has battery power remaining, you do not need to plug it in while charging your earbuds. NOTE: Connecting your case to a power outlet while charging the earbuds will not increase the charging speed of the earbuds.
- Page 6 Charging the case Step 1: Connect the micro-USB end of the connector to the back of the charging case, below the lid hinge. Step 2: Connect the USB end of the connector to a power adapter or into the USB port of your computer.
- Page 7 Wait for all four lights to turn ON indicating that it has been fully charged. The indicator lights at the front will provide an approximation of how much charge is on the Belkin AUC001. The number of lights lit correspond to the following: Four lights –...
- Page 8 The case will change from charge mode to a trickle charge maintenance mode once it reaches 100%. This means it is safe to keep your case plugged in even if it is fully charged. You can remove the case from power at any time or any charge level. A lower charge level, however, will reduce the number of times you can recharge your earbuds before the case is out of power.