Log And Total Log; Reset Log; Reset Total Log - NorthStar NS3100 Multi Instrument Reference Manual

4 Log and total log

Total log

4-1 Reset log

4-2 Reset total log

Reference Manual and Installation Manual
The NS3100 Multi has two distance logs:
LOG: Trip distance. The distance travelled since
log was reset.
TOTAL LOG: Total distance. The distance travelled
since total log was reset:
Resetting zeros the log (trip distance):
1 Press until LOG is displayed.
2 Press + .
Resetting zeros the total log (total distance), as well
as the log and avg speed:
1 Press until TOTAL LOG is displayed.
2 Hold + for 5 seconds.
The log units are NM, KM or M (miles) and
correspond to the speed units, for example if you set
the speed units to KPH then the log units are KM (see
section 3-1).
11