Table of Contents
Advertisement
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 13
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting an external monitor
HDMI port
HDMIport
The HDMI port of your device can be used to connect an external amplifier, LCD
TV or a plasma TV with an HDMI connection.
Some LCD televisions have only two loudspeaker ports and therefore
cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you
must change the HDMI sound settings accordingly.
You can find the settings under Control Panel - Hardware and Sound. Deactivate the
settings for DTS Audio and Dolby Digital to enable playback of HDMI sound.
Fujitsu
chapter before connecting or disconnecting
► Connect the data cable to the
external device.
► Connect the data cable to the HDMI port.
Connecting external devices
71
Advertisement
Table of Contents
