Using Custom Keys; Setting A Function To Custom Keys; 2D Switching; Locking Control Buttons - Eizo CuratOR EX3242-3D Installation Manual

1-3. Using Custom Keys

Execute the functions assigned to the custom keys (F1 (
information on how to set a function to each custom key, see
1.
Press F1 (
The function associated with the custom key that is pressed will run.
Note
• For dual screen display (PbyP or PinP), adjust the "Active Window" side.
●

Setting a function to custom keys

1.
Press (MENU).
The Setting menu appears.
2.
Press (F3) or
The "Preferences" menu appears.
3.
Press (F3) or
The "Custom Key" menu appears.
4.
Press (F3) or
then press
5.
Press (F3) or
The selected function is assigned to the corresponding custom key.
1-4. 3D/2D Switching
Switch between 3D and 2D.
1.
Press the 3D/2D (
3D and 2D are toggled each time this button is pressed.
Note
• The 3D mode indicator

1-5. Locking Control Buttons

Adjusted or set states can be made unchangeable.
Procedure
1. Press the
Note
• Press the
6
Chapter 1Chapter Basic Adjustment / Setting
), F2 ( ), F3 (
(F4) to select "Preferences", and then press
(F4) to select "Custom Key", and then press
(F4) to select which custom key to set the function to, and
(ENTER).
(F4) to select the function, and then press
(ENTER) ) button.
is displayed on the upper left of the screen in 3D mode.
(MENU) and (ENTER) keys for at least 4 seconds.
(MENU) and (ENTER) keys for at least 4 seconds to exit Key Lock.
), F2 (
"Setting a function to custom keys" (page
) and F4 ( ).
), F3 ( ) and F4 (
(ENTER).
(ENTER).
(ENTER).
)). For
6).