Uninstalling The Hardware And Software - National Instruments NI-CAN User Manual

Uninstalling the Hardware
and Software
Uninstalling the CAN Hardware from Windows 98/95
© National Instruments Corporation
This appendix describes how to uninstall the CAN hardware and the
NI-CAN software.
Before physically removing the CAN hardware from the computer,
you must remove the hardware information from the Windows Device
Manager.
To remove the hardware information from Windows 98/95, double-click on
the System icon in the Control Panel, which you can open from the
Settings selection of the Start menu. Select the Device Manager tab in the
System Properties dialog box that appears, click the View devices by type
button at the top of the Device Manager tab, and double-click on the
National Instruments CAN Interfaces icon.
To remove an interface, select it from the list of interfaces under National
Instruments CAN Interfaces as shown in Figure A-1, and click the
Remove button.
A-1
A
NI-CAN User Manual