DCS-1600
3-2 Replacing brake lever (Continued)
A
14. Be sure not to pinch leads and assemble cover (S) to unit.
NOTE: Check the followings after assembling cover (S).
(1) Two ribs (s1) of cover (S) are inside of motor cover.
OK
(2) Both sides of cover (S) are set into motor cover.
OK
S
CHAIN BRAKE SYSTEM
H
h3
S
11. Move brake lever (A) forward to activate chain
brake.
12. Place brake switch (H) on motor cover as shown.
13. Pass leads (h3) of brake switch (H) through
cutout of motor cover as shown.
NO
s1
NO
S
21
S