DTI2/DMI Pack Replacement
Chart 3-1
Replacement of Digital Interface circuit pack
Firmly touch the metal frame of the cabinet to discharge static
electricity from your body before handling circuit packs
Step
P r o c e d u r e
Pack Removal:
1
Disable the Network Loop, using Overlay 60. The command
is DISL 'loop number'.
2
Disconnect cables on the Interface pack faceplate.
3
Remove circuit pack.
Installation
4
Install the pack in the appropriate slot. LEDs will flash:
4 LEDS on, 1 LED off.
4 LEDS off, 1 LED on.
CAUTION
– continued –
2 Mb/s DTI Fault Clearing Procedures 553-2911-510
3-1 of 5 pages