Specifications - Sharp VC-A230NZ/X Service Manual

1. SPECIFICATIONS

Video recording system: Rotary, slant azimuth two heads helical scan system
Video signal: PAL colour or monochrome (CCiR system B/G) signals
Recording/playing time: 240 min max. with SHARP E-240 tape (PAL: SP mode)
Tape width: 12.7mm
Tape speed: 23.39 mm/s (PAL: SP mode)
Receiving channel: VHF Channel NZ1 - NZ11, UHF Channel E21 - E69(VC-A230NZ/A280NZ/A480NZ)
RF converter output signal: UHF Channel E21 - E69 Adjustable preset to E3(VC-A230NZ/A280NZ/A480NZ)
Power requirement: AC230V ± 15%(NZ) ,AC240V ± 10%(X) , 50Hz
Power consumption: Approx. 16W
Operating temperature: 5°C to 40°C
Storage temperature: –20°C to 55°C
Dimensions: 360 mm (W) x 256 mm (D) x 92 mm (H)
Horizontal resolution: 250 lines (PAL-SP)
Frequency responce: 80 Hz ~ 10 kHz (SP mode)
Accessories included: 75 ohm coaxial cable
Format: VHS PAL/NTSC standard
480 min max. with SHARP E-240 tape (PAL: LP mode)
160 min max. with SHARP T-160 tape (NTSC: SP mode)
480 min max. with SHARP T-160 tape (NTSC: EP mode)
11.70 mm/s (PAL: LP mode)
33.35 mm/s (NTSC: SP mode)
16.67 mm/s (NTSC: LP mode) (Playback only)
11.12 mm/s (NTSC: EP mode)
Antenna: 75 ohm unbalanced
VHF Channel AU0 - AU12, UHF Channel AU28 - AU69(VC-A230X/A280X/A480X)
UHF Channel AU28 - AU69 Adjustable preset to AU37(VC-A230X/A280X/A480X)
Weight: Approx. 2.9 kg
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
S/N ratio: 45 dB (PAL-SP)
AUDIO 0 dBs = 0.775 Vrms
Input: Line -8 dBs/47k ohm
Output: Line -8 dBs/1k ohm
S/N ratio: 43 dB (SP mode)
80Hz ~ 5Hz (LP/EP mode)
Operation manual
Infrared remote control
Guarantee Card
Battery
As part of our policy of continuous improvement, we reserve the
right to alter design and specifications without notice.
Note: The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
3
VC-A230NZ/X
VC-A280NZ/X
VC-A480NZ/X