Bay Networks Nautica 250 Installation Manual page 7

• When you request ISDN "U" Interface Service, you must provide the telephone
company with
-- The Facility Interface Code: 02IS5
-- The Service Order Code(s) (SOC): 6.0F
-- The required Universal Service Order Code (USOC) jack: RJ49C
• When you request ISDN "S/T" Interface Service, you must provide the
telephone company with
-- The Service Order Code(s) (SOC): 6.0P
-- The make, model number, and FCC Registration number of the NT1
Note: ISDN S/T cannot be directly connected to the network.
• When you request Primary Rate ISDN Service, you must provide the telephone
company with
-- The Facility Interface Code: 04DU9-1SN (1.544 MB, ESF framing format
with B8ZF coding)
-- The Service Order Code(s) (SOC): 6.0Y
-- The required Universal Service Order Code (USOC) jack: RJ48C
2. Your telephone company may make changes to its facilities, equipment, operations, or
procedures that could affect the proper functioning of your equipment. The telephone
company will notify you in advance of such changes to give you an opportunity to
maintain uninterrupted telephone service.
3. If the unit causes harm to the telephone network, the telephone company may
temporarily discontinue your service. If possible, they will notify you in advance, but
if advance notice is not practical, you will be notified as soon as possible and will be
informed of your right to file a complaint with the FCC.
4. If you experience trouble with the unit, please contact the Bay Networks Technical
Solutions Center in your area for service or repairs. Repairs should be performed only
by service personnel authorized by Bay Networks, Inc.
United States
Valbonne, France
Sydney, Australia
Tokyo, Japan
5. You are required to notify the telephone company when you disconnect the unit from
the network.
301789-A Rev.00
1-800-2LAN-WAN
33-4-92-96-69-68
61-2-9927-8800
81-3-5402-0180
vii