Table of Contents
Advertisement
CHAPTER
6
Install the Honeywell® FlameManager Application
Download and install the PC application.
Minimum System Requirements:
Microsoft Windows 10 or later. 32 or 64-bit version.
l
Microsoft .NET framework version 4.6 or later.
l
A USB port.
l
A 1280 X 768 pixels or larger screen.
l
1 GB of free disk space
l
1.
Go to Firmware download site and download the FlameManager.zip file.
2.
Unzip FlameManager.
3.
Run Setup.exe
4.
Copy the file HoneywellFlame.lic to the Documents folder.
5.
Verify that the FlameManager icon appears on the desktop. It looks like this:
FlameManager is an application program for personal computers running Microsoft Windows
version 10 and later. It facilitates configuring and interrogating the FS24X Plus™ Flame detector.
FlameManager can communicate with the FS24X Plus™ over either USB or RS-485 networks. Most
of the capabilities of the program are operating from the Main Window from which is shown in
Main Window.
Honeywell® FS24X Plus™ |
Appendix 3: Honeywell® FlameManager
User Manual
45
Advertisement
Table of Contents
