MONOCHROME DISPLAY
This provides the following information:
-
the time,
-
the audio equipment displays (refer
to the "Audio and Telematics" sec-
tion).
Setting the time
The digital clock can be set in automatic
mode or in manual mode .
Automatic mode
This mode permits automatic setting of
the local time using the signal from the
RDS stations.
The symbol "CT" appears on the
display.
Manual mode
This mode permits manual setting of
the time using the audio equipment
buttons.
It can also be used when the "Automatic
mode" displays an inaccurate time, when
the local RDS stations are broadcasting
from a different time zone.
Selecting the Setting
Select the automatic mode or the
manual mode as follows:
Press button A "PWR" to switch on
the audio system.
Access the setting mode by press-
ing button B
mately 2 seconds.
Press button B "TUNE" several
times to scroll through the various
menus and select the CT menu
(clock time).
The order of the menus is the
following: AF / CT / REG / TP-S / PTY
display language / SCV / PHONE /
Functions setting mode OFF.
I
37