Date And Time - Nokia N73 User Manual

registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select
packet data connection only if you start an application or
action that needs it.
Access point—The access point name is needed to use
your device as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your (U)SIM card. You can
save these settings to your device, view, or delete them in
Configs..
SIP settings
SIP (Session Initiation Protocol) settings are needed for
certain network services using SIP, such as video sharing.
You may receive the settings in a special text message
from your network operator or service provider. You can
view, delete, or create these setting profiles in
settings.
Data call
The data call settings affect all access points using a GSM
data call connection.
100 Copyright © 2006 Nokia. All rights reserved.
When needed, the device uses a
SIP
Online time—Set the data calls to disconnect
automatically after a time-out if there is no activity. To
User
enter a time-out, select
in minutes. if you select Unlimited, data calls are not
disconnected automatically.

Date and time

See 'Clock settings', p. 45, and language settings in
'General', p. 96.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See 'Glossary of PIN and
lock codes', p. 101.
PIN code, PIN2 code, and Lock
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See 'Glossary of PIN
and lock codes', p. 101.
defined, and enter the time
code—You can change the