Advertisement
CAUTIONS / WARNINGS / IMPORTANT
SAFETY INSTRUCTIONS
8. Any Individual who may be pregnant or recently gave birth, has
a heart condition or a pacemaker, suffers from diabetes or other
sensory impairment, phlebitis and/or thrombosis, joint dysfunction,
inflammation or injuries, weak bones, osteoporosis, a high fever,
an abnormal or curved spine, is at an increased risk of developing
blood clots, has pins/screws/artificial joints or other medical devices
implanted in his/her body, is being treated for a medical condition
or physical injury or is under a doctor's care should consult with a
medical professional before using a massaging device designed for
home use.
9. Do not use sharp objects to handle the product in order to avoid
damage.
10. Do not stand when you are using the massager. Do not place
excessively heavy objects on the device in order to avoid damage.
11. The product possesses a temperature-protection device; It will
automatically shut-off when the temperature exceeds the safe limit.
LIMITED 2-YEAR WARRANTY
This device* has a limited warranty of 2 years from the original date
of purchase against workmanship and defects in material. If under
normal use, your product fails to operate, please contact our customer
service department at info@stareliteinc.com. A refund or replacement
will be provided to you with proof of purchase. Star Elite Inc. may deny
claims of damage caused by misuse or modifications of this product.
*60 days for the accessories (AC/DC adapter)
- 10 -
TROUBLESHOOTING
Symptom
Possible Cause
The
1. Disconnected power or
massager
loose plug causing poor
does not
contact.
turn on
2. The power switch is off or
the timer has been reset.
3. The massager shuts
off automatically after
extended use to protect
against overheating.
The
1. Feet are positioned
massage
incorrectly.
intensity is
2. Default setting is LOW.
too high or
User may have selected
too low
Medium or High.
No
1. Heat function is OFF.
heating or
2. Heat mode is set to
insufficient
Bottom, not Full/Instep.
heating
3. The heat function is
designed to warm slowly
(up to ten minutes to
reach full temperature).
The control
1. The plastic film on the
panel is not
control panel is not
responding
removed.
properly
2. Fingers are wet.
3. Insufficient pressure or
area pressed to activate
the touch-sensitive
buttons.
Solution
1. Make sure the power source is
working and the plug fits securely
into the outlet.
2. Press the power button on either the
control panel or remote control. A
red indicator light will confirm the
unit is ON.
3. Allow the motor to cool at least 30
minutes between uses.
1. Adjust the foot angle for more or less
kneading contact.
2. Select a different intensity level. We
recommend starting with LOW and
increasing the intensity to MEDIUM
or HIGH to match your comfort level.
1. Press the heat button. The indicator
light will confirm that heat is ON.
2. Select Full/Instep Heat Mode for
maximum heating area.
1. Remove the plastic film before use.
2. Dry your fingers before touching the
control panel.
3. Use your thumb for better coverage
of the touch-sensitive buttons.
- 11 -
Advertisement
