Sony Handycam HDR-CX450 Service Manual page 49

Notes on Assembling the Lens Section
How to distinguish the side of Optical Filter Block facing to Lens Device
The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing the IR cut coated side to the lens
device. Distinguish the IR cut coated side from the other by applying the
fluorescent light to the Optical Filter Block in the dark place (cut off the
outside light).
Optical Filter Block
Hold it with tweezers or the like.
[IR Cut Coated Side]
Lens Device side
• IR cut coating surface
The red coating is reflected.
Attaching the FP-2060 Flexible Board
Terminal side
Valley fold
Make a habit in a valley fold on
the FP-2060 Flexible Board.
HDR-CX450/HDR-CX455/HDR-CX485
[The Other Side]
• The other surface
The red coating is
• Side view
not reflected.
The red belt
is seen.
Lens Device side
Push the remained part to the lens side.
4-9