Table of Contents
Advertisement
174 Driving and parking
The HOLD function is keeping the vehicle sta‐
R
tionary.
Active Parking Assist is keeping the vehicle
R
stationary.
This is the case if one of the following conditions
is also fulfilled:
The engine is switched off.
R
The seat belt tongue is not inserted in the
R
seat belt buckle of the driver's seat and the
driver's door is opened.
There is a system malfunction.
R
The power supply is insufficient.
R
The vehicle is stationary for a lengthy period.
R
When the electric parking brake is applied, the
red ! indicator lamp appears in the instru‐
ment cluster.
The electric parking brake is not automatically
applied if the engine is switched off by the ECO
start/stop function.
Electric parking brake function (releasing
automatically)
The electric parking brake is released when the
following conditions are fulfilled:
The driver's door is closed.
R
The engine is running.
R
The transmission is in position h or k and
R
you depress the accelerator pedal or you
shift from transmission position j to h or
k.
If the transmission is in position k, the boot
R
lid must be closed.
If the seat belt tongue is not inserted into the
seat belt buckle of the driver's seat, the follow‐
ing conditions must be fulfilled:
The driver's door is closed.
R
You move the transmission out of transmis‐
R
sion position j or you have previously
driven faster than 3 km/h.
When the electric parking brake is released, the
red ! indicator lamp in the instrument clus‐
ter goes out.
Applying/releasing the electric parking
brake manually
Applying
Push handle 1.
#
The red ! indicator lamp appears in the
instrument cluster.
Advertisement
Table of Contents
