Table of Contents
Advertisement
Screen saver
A digital clock screen saver is used for power saving in standby mode. It activates
when no function of the phone has been used for a certain length of time. Press
any key to deactivate the screen saver. The screen saver is also deactivated when
the phone is out of the network coverage area.
Press
Menu
and select Settings,
the length of time after which the digital clock display will be activated. The
timeout can vary from 5 seconds to 60 minutes.
Note that the screen saver overrides all graphics and texts that are on the display
in standby mode.
■ Tone settings
Press Menu, and select
settings in the
Profiles
make, change the settings in the active profile.
Select
Incoming call alert
voice call. The options are Ringing, Ascending,
Select
Ringing tone
for incoming voice calls. To select ringing tones that have
been saved in the Gallery, select
Select
Ringing volume
The vibrating alert does not work when the phone is connected to a charger, a
desktop stand, or a car kit.
Copyright
Display
settings, and
Settings
and then
Tone
menu, see
Profiles
on page 48. Note that the settings you
to select how the phone notifies you of an incoming
Open gallery
and
Vibrating alert
for incoming voice calls and messages.
©
2003 Nokia. All rights reserved.
Screen saver
timeout. Select
settings. You can find the same
Ring
once,
Beep once
and Off.
from the ringing tone list.
76
Advertisement
Table of Contents
