General Information; Access Codes - Nokia 6282 User Manual

G e n e r a l i n f o r m a t i o n

General information

■ Access codes

Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. To change the code, and to
set the phone to request the code, see "Security," p. 72.
If you enter an incorrect security code five times in succession, the phone
ignores further entries of the code. Wait for 5 minutes, and enter the
code again.
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your
SmartChip against unauthorized use. See "Security," p. 72. The PIN code
is usually supplied with the SmartChip. Set the phone to request the PIN
code each time the phone is switched on.
The PIN2 code (4 to 8 digits) may be supplied with the SmartChip and is
required for some functions.
The module PIN is required to access the information in the security
module. See "Security module," p. 49. The module PIN is supplied with
the SmartChip if the SmartChip has a security module in it.
The signing PIN is required for the digital signature. See "Digital
signature," p. 50. The signing PIN is supplied with the SmartChip if the
SmartChip has a security module in it.
PUK codes
The personal unblocking key (PUK) code and the universal personal
unblocking key (UPUK) code (8 digits) is required to change a blocked
PIN code and UPIN code, respectively. The PUK2 code is required to
change a blocked PIN2 code.
If the codes are not supplied with the SmartChip, contact your service
provider for the codes.
9