Settings when GSM data is the selected data bearer
•
Dial-up number
- Key in the phone number and press OK.
•
IP address
- Key in the address, and press OK. You obtain the IP address
from your network operator or service provider.
•
Authentication type
•
Data call type
- Select Analog or ISDN.
•
Data call speed
- Select the speed you want to use, or select Automatic.
Automatic
is available only if the current selected data call type is
Analog. The actual data call speed depends on the service provider.
•
Login type
- Select
•
User name
- Key in the user name and press OK.
•
Password
- Key in the password and press OK.
•
Display terminal window
user authentication when you access intranet sites during a dial-up
connection.
Settings when GPRS is the selected data bearer
•
GPRS access point
•
An access point name is needed to establish a connection to a GPRS
network. You obtain the access point name from your network operator or
service provider.
•
IP address
- Key in the address and press OK. You obtain the IP address
Copyright
- Select
Secure
or Normal.
Manual
or Automatic.
- Select Yes, if you want the server to perform
- Key in the access point name and press OK.
©
2003 Nokia. All rights reserved.
168