Table of Contents
Advertisement
Using Your New TV
Getting Started
Step 1
Connect the antenna (KV-XF21M80)
If you wish to connect a VCR, see the "Connecting a VCR" diagram below.
Rear of TV
IEC connector
(not supplied)
Antenna cable
(not supplied)
or
4
Using Your New TV
CAUTION
Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
Insert the batteries
into the remote
Preset the channels automatically
: Signal flow
Now You Are Ready. . .
To watch your TV, see page 12.
MC-Service
Notes
• If you connect a monaural VCR, connect the yellow plug to
yellow jack) and the black plug to
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Front of TV
1
2
ONE-PUSH AUTOMATIC PROGRAMING
ONE-PUSH AUTOMATIC PROGRAMMING
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 10).
(the
-L (MONO) (the white jack).
1
1
VHF LOW AUTO
5
Using Your New TV
Advertisement
Table of Contents
