Nokia 3125 User Manual page 93

If your wireless service provider supports this feature, you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is
connected.
For better performance during data calls, place the phone on a stationary surface
with the keypad facing downward. Do not move the phone by holding it in your
hand during a data call.
Note: For more information on connectivity, refer to the PC/PDA
Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded
from the Nokia website at www.nokia.com.
1. At the standby mode, select
Incoming data/fax call
Normal—The phone receives incoming calls as usual.
Data calls only—The phone receives only data calls.
Fax calls only—The phone receives only fax calls.
2. When you are finished receiving the fax or data call, repeat step 1 and select
Normal.
Data transfer
You can view the transmission speed when sending or receiving data or fax calls.
At the standby mode, select
Data rate display > Graphic
Menu > Settings
> Normal, Data calls
Menu > Settings
or Off.
©
Copyright 2005 Nokia. All rights reserved.
> Call settings > Data/fax calls
only, or Fax calls only.
> Call settings > Data/fax calls
>
>
93