Tone Settings - Nokia 2650 User Manual

M e n u f u n c t i o n s
• To activate the profile for a certain amount of time, select
and set the end time. When this time expires, the previous profile
that was not timed, becomes active.
• To change the profile settings, select Personalise. Select the setting
that you want to change and make the change.
Select Light sequences
certain functions. For more information, see
xii.
For information on the other settings, see
40. With Profile name
General profile cannot be renamed.
The name of the currently active profile is shown in standby mode, except
when the General
front of its name.
Tip: To change the profile quickly in standby mode, press the power
key and select the profile that you want to activate.

Tone settings

You can change the tone and vibrator settings of the currently selected
profile. The same settings can also be found in the
39.
To access this menu: Press
and Tone settings. Select
40
to activate the display and keypad lights for
you can rename the selected profile. The
profile is active. If the profile is timed,
Menu in standby mode, and select
Copyright © 2004 Nokia. All rights reserved.
Timed
"Light alerts" on page
"Tone settings" on page
is shown in
Profiles menu, see page
Settings