Rename Profiles - Nokia 2280 User Manual

Personalisation
Set keypad tones
Use the Keypad tones
volume of the tones heard when pressing
your phone keys.
1
From the selected profile's
Personalise menu, scroll to
tones and press Select.
2
Scroll to one of the levels and press
Select.
Important: If you choose Off, no
keypad tones are heard. The
Silent profile automatically
turns keypad tones off.
Set warning tones
You can customise the way your phone
plays warning tones.
include the tones played when there is an
error, during confirmations, when a
battery is low, and when you need to
recharge the battery.
1
From the selected profile's
Personalise menu, scroll to
tones and press Select.
2
Scroll to On and press Select.
If you do not want to use warning tones,
you can turn them off by scrolling to
and pressing Select.

• RENAME PROFILES

You can rename any of the profiles
except Normal. You may want to use
your own name for one of the profiles.
When you select this profile, your name
appears on the Start screen.
1
Press Menu 3 (Profiles).
2
Scroll to the desired profile and
press Select.
48
option to set the
Keypad
Warning tones
Warning
Off
Copyright © 2004 Nokia. All rights reserved.
3
Select Personalise, scroll to
name, and press Select.
4
Enter the new name and press OK.
Note: You cannot rename the
General profile.
Select and customise an
accessory profile
Note: You must have an
accessory (such as a loopset)
attached to your phone prior to
selecting the
menu.
To select and customise profiles for use
with the headset, handsfree device
(carkit), or loopset:
1
Press Menu 4-4 (Settings
Accessory settings).
2
Scroll to Headset
press Select.
IF YOU SELECTED HEADSET
The Default profile and
answer options are your available
• Default profile-Choose the profile
you wish to be automatically
activated when your phone is
connected to a carkit.
• Automatic answer-Calls are
answered automatically after one
ring when connected to a car kit.
Scroll to On or Off
• Lights-Choose to keep the phone
lights always on, or to shut off
automatically after several seconds.
Scroll to On or Automatic
Select.
Profile
Accessory settings
>
or Loopset and
Automatic
choice.
and press Select.
and press