Table of Contents
Advertisement
28 28
Multimedia system
Quart
Quarter er-mile r
-mile race
ace
Select
Quarter
Mile.
#
The time measurement runs until a mile has
been traveled or a previously set distance (e.g.
quarter mile, third mile or half mile) has been
reached.
%
The possible values for setting the end dis-
tance are determined by the system and can-
not be freely chosen.
Measurement can be stopped early by selecting
Stop
or by stopping the vehicle.
Manual st
Manual star art f t for acceler
or acceleration and q
ation and quart
uarter er-mile
r r ace
ace
Select
Acceleration
or
Quarter
Mile.
#
Select
Manual
start.
#
Three red tra c lights appear one a er the
other. The reaction time measurement starts
when they change to green at the same time.
The reaction time is displayed as soon as you
drive o . If you drive o too early, the
start
message appears and acceleration or
quarter mile measurement will be canceled.
Measuring br
Measur
ing braking
aking
Select Braking.
#
Select
Start
Record.
#
Measurement is incremental, in steps of
30 mph (50 km/h) to a standstill. If the brak-
ing procedure is started e.g. at a speed of
99 mph (160 km/h), measurement starts as
soon as 90 mph (150 km/h) has been
reached.
S S t t or oring and calling up measur
ing and calling up measurement v
When a measurement has been completed or
canceled, the measured time can be stored.
-mile
A er a measurement, select
#
ment?
.
The stored measurements can be displayed via
the
History
menu item.
Editing measurements
Editing measur
ements
Select History.
#
Jump
Highlight the desired measurement.
#
Select Ü options.
#
Select
Weather
or Delete.
#
%
The measurements can be displayed by cate-
gory, e.g. acceleration measurements, by
applying a lter.
Calling up the t
Calling up t
he teleme
Multimedia system:
Vehicle
4
The telemetry display shows current vehicle data
as a digital value and as a diagram.
ement values
alues
Up to four parameters can be selected that are to
be shown in the display, such as:
Engine speed
R
Save measure-
Wheel angle
R
Speed
R
Steering angle
R
Set the desired parameters.
#
Set the time.
#
The set parameters are evaluated in the dia-
gram for the time set.
%
The time can range between 30 seconds and
a maximum of 20 minutes.
elemetr try display
y display
TRACK PACE
Telemetry
5
5
Advertisement
Table of Contents
