Advertisement
Quick Links
How to pair the Belkin PAC003 earbuds
How to set the Belkin PAC003 earbuds into pairing mode
Before you can pair your Belkin SOUNDFORM™ Nano Wireless Earbuds for Kids,
PAC003 with your device, they need to be in pairing mode.
Step 1:
Make sure both the earbuds and case are charged. For instructions on how to
charge the Belkin PAC003, click here.
Step 2:
Open the charging case and remove the earbuds from it. The indicator lights on
the earbuds will alternate between blue and white.
Advertisement
Related Manuals for Belkin PAC003
Summary of Contents for Belkin PAC003
- Page 1 How to pair the Belkin PAC003 earbuds How to set the Belkin PAC003 earbuds into pairing mode Before you can pair your Belkin SOUNDFORM™ Nano Wireless Earbuds for Kids, PAC003 with your device, they need to be in pairing mode.
- Page 2 The Belkin SOUNDFORM™ Nano Wireless Earbuds for Kids, PAC003 features high quality sound, supreme comfort and fit, and exceptional durability. The Belkin PAC003 allows you to control calls and audio playback simply by touch. This also features touch-sensitive pads that can perform different functions by tapping or...
- Page 3 This article will walk you through the steps on how to unpair your earbuds from your Bluetooth® device. Step 1: Turn OFF your earbuds. To do this, you can do either of the two options: a. Press on both earbuds for 6 seconds. b.
- Page 4 Step 2: On your phone or tablet, go to Settings > Bluetooth. Step 3: Look for the name of your earbuds. To unpair them, follow the instructions below: NOTE: System instructions may vary depending upon your device's operating system. For Android™ Go to Settings >...
- Page 5 The case of the Belkin SOUNDFORM™ Nano Wireless Earbuds for Kids, PAC003 contains a battery that allows you to charge your earbuds without worrying about finding a power outlet. This article will show you how to charge the Belkin PAC003. Click on each link below to learn more. Charging your earbuds...
- Page 6 To charge your earbuds, open the case and place each earbud in its designated slot then close the lid. If the case has battery power remaining, you do not need to plug it in while charging your earbuds. While charging is taking place, each earbud’s indicator light will blink. When the light indicators stop blinking, this means that the earbuds are now fully charged.
- Page 7 Charging the case Step 1: Connect the micro-USB end of the connector to the back of the charging case, below the lid hinge. Step 2: Connect the USB end of the connector to a power adapter or into the USB port of your computer.
- Page 8 Step 3: When all lights on the charging case are lit, this indicates that the Belkin PAC003 is fully charged. The number of lights lit corresponds to the following: Four lights – 100% charged • Three lights – 75% charged •...