Table of Contents
Advertisement
Circuit Module Physical Layouts, Bill of Materials, and Schematic
(1) These assemblies are ESD sensitive, ESD precautions should be observed.
(2) These assemblies must be clean and free from flux and all contaminants.
Use of no clean flux is not acceptable.
(3) These assemblies must comply with workmanship standards IPC-A-610 Class 2.
(4) Reference designators marked with an asterisk ('**') cannot be substituted.
All other components can be substituted with equivalent manufacturer's components.
6
bq27742EVM Single-Cell Impedance Track™ Technology Evaluation Module
Copyright © 2014, Texas Instruments Incorporated
www.ti.com
SLUUAX8 – March 2014
Submit Documentation Feedback
Advertisement
Table of Contents
