Battery Installation - Fisher-Price W6117 Manual

Battery Installation

We recommend the use of alkaline batteries for longer battery life.
RC Vehicle
• Loosen the screws in the bottom of the vehicle
with a Phillips screwdriver. Lift the top of the vehicle
off of the chassis to access the battery compartment.
Insert three "AAA" (LR03) alkaline batteries.
• Replace the top of the vehicle and tighten the screw
with a Phillips screwdriver. Do not over-tighten.
• If the vehicle begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and reinstall.
IMPORTANT! Under normal use conditions, the batteries in the vehicle will require
replacement more often than the batteries in the remote controller. For additional
information, refer to the troubleshooting section.
Remote Controller
• Locate the battery compartment on the back
of the remote controller.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door and insert three
"AAA" (LR03) alkaline batteries.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• If the remote controller begins to operate
erratically, you may need to reset the electronics.
Remove the batteries and reinstall.
Talking Vehicle
• Loosen the screws in the bottom of the vehicle.
• Remove the exhausted battery and dispose of it properly.
• Insert a new "AAA" (LR03) alkaline battery.
• Replace the bottom of the vehicle and tighten the screws.
Do not over-tighten.
• If this toy begins to operate erratically, you may
need to reset the electronics. Remove the
battery and reinstall.
• When sounds from this toy become faint or stop,
it's time for an adult to change the battery.
8