Toro Groundsmaster 4000 Series Installation Instructions

Slow-Moving Vehicle Sign Kit
Groundsmaster
Model No. 30665
This product contains a chemical or chemicals known to the State of California to
1
Installing the Mount
Parts needed for this procedure:
1 Mount
2 Washer
2 Strap
4 Lock nut
4 Bolt (1/4 x 1/2 inch)
Procedure
1. Place the mount against the ROPS at the desired
mounting height.
2. Slide a strap onto the ROPS opposite the mount, and
secure both the strap and the mount to the ROPS using
2 bolts (1/4 x 1/2 inch), 2 lock nuts, and a washer
(Figure 1).
3. Repeat step 2 for the opposite side
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® 4000 Series Traction Unit with Yanmar Engine
WARNING
CALIFORNIA
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
(Figure 1).
Register at www.Toro.com.
2
Mounting the Sign
Parts needed for this procedure:
1
Sign
3 Washer
2 Lock nut
2 Bolt (1/2 x 3/4 inch)
Procedure
1. Line up the mounting hole in the sign with the hole
in the mount (Figure
2. Secure the sign to the mount using 2 bolts (1/2 x 3/4
inch), 2 lock nuts, and 3 washers
Original Instructions (EN) All Rights Reserved *3378-228* A
Printed in the USA
Form No. 3378-228 Rev A
Installation Instructions
1).
(Figure 1).