Table of Contents
Advertisement
Section
05
Built-in CD Player
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1
Press FUNCTION to select Compression.
Press FUNCTION until Compression appears
in the display.
2
Press a or b to select your favorite set-
ting.
Press a or b repeatedly to switch between the
following settings:
COMP/BMX OFFCOMP 1COMP 2
COMP/BMX OFFBMX 1BMX 2
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1
Press FUNCTION to select Search mode.
Press FUNCTION until Search mode appears
in the display.
2
Press c or d to select the search meth-
od.
Press c or d until the desired search method
appears in the display.
! FF / REV Fast forward and reverse
! Rough search Searching every 10
tracks
20
En
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1
Select the search method Rough search.
Refer to Selecting the search method on this
page.
2
Press and hold c or d to search every
10 tracks on a disc.
# If a disc contains less than 10 tracks, pressing
and holding d recalls the last track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding d recalls the last track of the
disc.
# If a disc contains less than 10 tracks, pressing
and holding c recalls the first track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding c recalls the first track of the
disc.
Using disc title functions
You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD will be
displayed.
Entering disc titles
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
1
Play the CD that you want to enter a
title for.
Advertisement
Table of Contents
