Motorola iDEN i90c User Manual page 175

IMPORTANT: When you are using HCO, the sound coming from your
NOTE: TTY device manufacturer's proprietary feature such as Turbo-
Code, High-Speed, and Interruption are not supported by your
phone. These features must be turned off or disabled to use
your TTY device with your phone.
Setting TTY Baud Rate
By default, your phone's TTY baud rate is set to 45.45, the baud rate required
for TTY calls within the US. To make calls outside the US, set your TTY baud
rate to 50.0.
To change the TTY baud rate:
From the Initial Setup screen, press R to scroll to TTY Baud.
1
Press C under CHANGE.
2
Press S to scroll to the baud rate for your location.
3
Press C under SELECT.
4
Setting Alert Timeout
When you receive a voice mail message, a Text Message, or a Net Alert, your
phone sounds an alert tone every 30 seconds until you view or dismiss the
message. Alert Timeout sets the amount of time your phone continues to sound
these alert tones.
You can set your phone to sound alert tones for 1 minute, 5 minutes, 15 minutes,
30 minutes, or 1 hour, or to continue to alert you for an unlimited amount of
time, or to never sound an alert tone.
Setting Return to Home
Return to Home sets the amount of time your phone takes to return to the idle
screen after a phone call or Private Call:
• After Phone — sets the amount of time your phone takes to return to the
idle screen after a phone call.
phone speaker may be uncomfortably loud. Use caution
when putting the phone to your ear. (For information on
setting your phone's speaker volume, see "Voice
Volume" on page 168.
Settings
167