• Release the taps on the top, on the left and on the right side of Control Board Front Cover. (Fig. 3)
• Then remove the Control Board Front Cover. (Fig. 3)
• How to remove PCBs from the control board.
- Remove the Indicator Complete. (Fig. 4)
- Remove the earth wire. (Fig. 4)
- Release CN-DISP. (Fig. 5)
- Release CN-STM1. (Fig. 5)
- Release CN-TH. (Fig. 5)
- Release CN-MAIN. (Fig. 5)
- Release CN-PWR. (Fig. 6)
- Release CN-FM. (Fig. 6)
- Pull the hook and remove the PCBs.
42