Last updated: January 19, 2023 01:56. Revision #8414 Thank you for purchasing these Cambridge Audio SX-60 stand mount loudspeakers. We hope that you enjoy many years of listening pleasure from them. Your loudspeakers can only be as good as the system it is connected to. Please do not compromise on your amplifier or cabling. Naturally we particularly recommend amplification from the Cambridge Audio range, which has been designed to the same exacting standards as our...
What's included with the SX-60's? Last updated: January 19, 2023 01:56. Revision #8415 1. 2 x SX-60 speakers. 2. Installation guide. 3. 8 x rubber pads. 4. 2 x foam bungs.
Front panel Last updated: January 19, 2023 01:57. Revision #8416 1. 1” (25mm) Silk Dome Tweeter. 2. 6.5 ”(165mm) Doped Paper Cone Bass/Mid Driver. 3. Front Bass Port.
2. For the best results we would recommend using speaker stands to mount your SX-60 speakers. Alternatively, the speakers can be placed on a shelf, and in either case we would suggest leaving at least a 5cm space behind the rear of each speaker.
Page 9
4. Finally, when positioning, we would suggest that the distance between speakers and the listening position is equal. However, we would encourage experimentation until you find a solution that works for your space.
Frequently asked questions Last updated: January 19, 2023 01:57. Revision #8420 What is meant by speaker sensitivity? Speaker sensitivity is the level produced by the speaker at one meter, when supplied with one watt of power from an amplifier. It’s a way of describing how well the speaker produces acoustic energy, based on a given input.
Troubleshooting Last updated: January 19, 2023 01:57. Revision #8421 No sound through one or both channels. • Check that the amplifier is turned on. • Ensure that the correct input source is selected on the amplifier. • Confirm that all connections between the amplifier and loudspeakers are secure. •...