1. Manuals
  2. Brands
  3. Neilsen Manuals
  4. Power Tools
  5. CT3950
  6. Original instructions manual

Neilsen CT3950 Original Instructions Manual

1/2" dr mini composite air impact wrench
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1/2" DR MINI COMPOSITE AIR IMPACT WRENCH
CT3950
ORIGINAL INSTRUCTIONS
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.

Advertisement

Table of Contents
loading

Summary of Contents for Neilsen CT3950

  • Page 1 1/2" DR MINI COMPOSITE AIR IMPACT WRENCH CT3950 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.

  • Page 3: Ec Declaration Of Conformity

    In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 1/2" DR MINI COMPOSITE AIR IMPACT WRENCH Model: CT3950 Applicable EC Directives: EC Machinery Directive 2006/42/EC Harmonized standards EN ISO 12100:2010, EN ISO 11148-6:2012 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

  • Page 4: Specification

    1. SPECIFICATION Air pressure: 90PSI Free speed: 10000rpm Max. Torque: 600ft/lb Air consumption: 3.92cfm Air inlet:1/4" Weight: 1.25Kg 2. SAFETY INSTRUCTIONS WARNING – When using tools, basic precautions should always be followed, including the following: General To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool.
  • Page 5 key that is left attached to a rotating part of the tool increases the risk of personal injury. 5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. 6.Use safety equipment.

  • Page 6: Technical Description

    3. TECHNICAL DESCRIPTION 1. Anvil 2. Trigger 3. Air inlet 4. composite body 5. Torque setting 6. Forward/Reverse selector 4. UNPACKING AND CHECKING Carefully remove the product from the packaging and examine it for any sign of damage that may have happened during shipping. Lay the contents out and check them against the parts shown below.

  • Page 7: Air Supply

    5. AIR SUPPLY 1. Ensure tool air valve (or trigger) is in “off ” position before connecting to the air supply. 2. You will require an air pressure of 90psi, and an air flow according to specification. WARNING! Ensure the air supply is clean and does not exceed 90psi while operating the tool.

  • Page 8: Operation

    6. OPERATION WARNING! Ensure you read, understand and apply safety instructions before use. 1. Only use impact sockets which are specifically designed for use with an impact wrench. 2. Connect the wrench to the air hose. Run the tool for a few seconds to check if it is running properly.

  • Page 9: Troubleshooting

    8. TROUBLESHOOTING Loss of power or erratic action may be due to the following: a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or type of hose connectors. To remedy check the air supply . b) Grit or gum deposits in the wrench may also reduce performance.

  • Page 10: Assembly Diagram And Parts List

    11. ASSEMBLY DIAGRAM AND PARTS LIST 22.2 22.4.3 22.4.1 22.4.2 22.3 21.3 19 20 22.1 21.7 21.6 21.5 21.2 21.4 21.1 11 12...
  • Page 12 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...

Table of Contents