Installation Tools; Installation Accessories - H3C S5170-EI Series Installation Manual

Installation tools

No installation tools are provided with the switch. Prepare the following tools yourself as required:
•
ESD wrist strap
•
Flat-blade screwdriver
•
Phillips screwdriver
•
Needle-nose pliers
•
Marker

Installation accessories

Before installation, make sure you have all the required installation accessories. If an installation
accessory is damaged or lost, purchase a new one by using the BOM code in
Table 8 Installation accessories
Code
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Description
Front mounting kit, including a
pair of front mounting brackets
and eight M4 screws
Rear mounting bracket kit,
including a pair of rear mounting
brackets and two shoulder
screws
M6 screw and cage nut
Rubber feet
Grounding cable
Grounding screw
Power module filler panel
Quantity
1 pair, provided
1 pair, provided
User supplied
Four, provided
1, provided
1, provided
1, provided
7
Table 8.
Applicable device models
All models
S5570S-28S-HPWR-EI
S5570S-54S-PWR-EI
S5570S-30MS-UPWR-EI
All models
All models
All models
All models
S5570S-28S-EI
S5570S-54S-EI
S5570S-36F-EI