Table of Contents
Advertisement
Q-Lite Satellite Modem Installation and Operating Handbook
6.2.4.15 L-band Output Power
IF: 0 to –25dBm; step size: 0.1dB
Range:
L-band: +5 to –40dBm (950 to 1950MHz)
Description:
This is the transmitted output power when using IF or L-band.
6.2.4.16 Modem/BUC Carrier
These allow the modem and BUC carriers to be switched on/off independently of each
other. BUC carrier control requires a control channel (i.e FSK or RS485) to exist between
the modem and the BUC.
6.2.5 Edit->Tx-Rx->Service->Advanced Screen
The Edit->Tx-Rx->Service->Advanced screen is shown in Figure 6-6.
Figure 6-6 Edit->Tx-Rx->Service->Advanced Screen
6.2.5.1 FastLink™ Optimisation Mode
The FastLink optimisation mode will be shown if FastLink™ has been selected.
Balanced
0 to –40dBm (1950 to 2150MHz)
0 to –30dBm (2150 to 2450MHz)
step size: 0.1dB
Table 6-15 L-band Output Power
Provides performance that is a good balance between low latency
and good BER performance. It is the best compromise between
trying to achieve the low latency of TPC and the BER performance
of conventional LDPC.
6-24
Advertisement
Table of Contents
