Rf Switch/Rf Modulator Connections - Nintendo 64 Instruction Booklet

C
C
Connecting to a MONO TV
or VCR (No Stereo Sound)
Make sure to plug the Audio/Video Cable into
the "INPUT" connections of your TV or VCR (Do
not use connections labeled "OUTPUT").
Back of Control Deck
MULTI OUT
Connector
Stereo AV Cable
6
After completing the connections as shown, turn to pg 9.
Audio/Video Cable Connections
Back of TV or VCR
Video IN Jack
YELLOW
Audio IN Jack
WHITE
"Y" Adaptor
(Not included – purchase from an
electronic supply store.)
RED
Using the "Y" adaptor is optional.
You may leave either the red or
white audio cable un-connected
until a "Y" adaptor is available.
When using this connection, you will need to
locate the INPUT SELECT on your TV and/or VCR
or remote in order for the game to appear on
your screen (see complete details on page 11).
D
D
Connecting to a TV Without
Audio/Video Connections
NOTE: This method of connection will
produce mono sound only (the left and
right stereo channels will be mixed).
If your TV or VCR does not have audio/video connections, you will need to use a
Nintendo 64 RF Switch and RF Modulator (sold separately), to complete your connections.
You can purchase the Nintendo 64 RF Switch and RF Modulator (packaged together as a set)
from most retail stores where Nintendo products are sold, or see the parts list and order form on
page 20 in this booklet.
Note: Be sure to use only the Nintendo 64 RF Switch and RF Modulator displaying
the Official Nintendo Seal of Quality to ensure the highest picture quality.
Back of Control Deck
MULTI OUT
Connector
RF Modulator
(sold seperately)
Remove the existing cable
connected to the back of your TV
and reconnect it to the RF Switch
as shown.
After completing the connections as shown, turn to pg 9.

RF Switch/RF Modulator Connections

Back of TV
VHF Cable Connector
(ANTENNA IN)
RF Switch
(sold seperately)
7