Hob - Care And Cleaning; Oven - Daily Use - Zanussi ZCG91236XA User Manual

Table of Contents

Advertisement

Burner
Triple Crown
Rapid
Semi-rapid

HOB - CARE AND CLEANING

WARNING! Refer to Safety chapters.
GENERAL INFORMATION
Clean the hob after each use.
Always use cookware with a clean base.
Scratches or dark stains on the surface have no
effect on how the hob operates.
Use a special cleaner suitable for the surface of
the hob.
Wash stainless steel parts with water, and then
dry them with a soft cloth.
CLEANING THE HOB
Remove immediately: melted plastic, plastic
foil, sugar and food with sugar, otherwise, the
dirt can cause damage to the hob. Take care to
avoid burns.
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny
metallic discoloration. Clean the hob with a
moist cloth and a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft cloth.
To clean the enamelled parts, caps and crowns,
wash them with warm soapy water and dry them
carefully before you put them back on.
CLEANING THE SPARK PLUG
This feature is obtained through a ceramic ignition
candle with a metal electrode. Keep these

OVEN - DAILY USE

WARNING! Refer to Safety chapters.
10
Diameter of cookware
(mm)
160 - 260
160 - 240
140 - 240
Burner
Auxiliary
ENERGY SAVING
If it is possible, always put the lids on the
cookware.
When the liquid starts to boil, turn down the
flame to barely simmer the liquid.
components well clean to prevent difficult lighting
and check that the burner crown holes are not
obstructed.
PAN SUPPORTS
The pan supports are not resistant to
washing in a dishwasher. They must
be washed by hand.
1. Remove the pan supports to easily clean the
hob.
Be very careful when you replace
the pan supports to prevent the
hob top from damage.
2. After you clean the pan supports, make sure
that they are in correct positions.
3. For the burner to operate correctly, make sure
that the arms of the pan supports are aligned
with the centre of the burner.
PERIODIC MAINTENANCE
Speak to your local Authorised Service Centre
periodically to check the conditions of the gas
supply pipe and the pressure adjuster, if fitted.
Diameter of cookware
(mm)
120 - 180

Advertisement

Table of Contents
loading

Table of Contents