Description
Item
1
Board-to-Board connector
3
R10 Write-Protect pins
5
System fan connector
7
M.2 Wi-Fi card slot
9
Memory slot (DIMM2)
Removing and installing hardware
This section provides instructions on how to remove and install hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by removing or installing hardware.
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Important safety information" on page 1.
Power adapter and power cord
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Turn off the Chromebox and remove all connected devices and cables.
2. Disconnect the Chromebox from ac power and all connected cables.
Removal steps
Description
Item
2
Microprocessor
4
ThinkCentre LED cable connector
6
Coin-cell battery
8
M.2 solid-state drive slot
10
Memory lsot (DIMM1)
.
Chapter 5
Hardware removal and installation
37