NETGEAR WG111T User Manual page 43

User Manual for the NETGEAR 108 Mbps Wireless USB 2.0 Adapter WG111T
Open the configuration utility by clicking on the WG111T icon in the Windows system
b.
tray.
Click on the Settings tab to display the view shown below.
c.
Figure 4-5: WEP security
2. Configure the Security settings.
Select WEP.
a.
Enter the SSID. This is also called the Wireless Network Name.
b.
Note: You will not get a wireless network connection unless the network SSID matches
exactly what is configured in the access point.
Tip: You can click the Networks tab to view a list of the available wireless networks and
their SSIDs at your location.
3. Save your settings in a Profile.
Type a descriptive name in the "Profiles" field.
a.
Click Save Profile. All the configuration settings are saved in this profile.
b.
Click Apply.
c.
Click Close to exit the configuration utility.
d.
Select the WEP encryption strength you will use.
4.
The choices are:
• 64-bit WEP data encryption
Configuration
202-10056-01
4-9