Mounting procedure (continued)
Mounting the floor stand to the projector
This section describes mounting the floor stand to the projector.
Power supply unit
8 - ENGLISH
1) Place the projector on the work bench.
The projector will not be stable so two people
should perform the floor stand mounting work.
2) Orient the floor stand to match the projector
orientation.
Rubber feet
z Place the power supply unit of the projector on
a work bench that has a soft cloth or the like
laid on it.
Attention
z Place the floor stand so that the
rubber feet are facing upward and then orient it
to match the projector orientation.