NETGEAR FA410TX Installation Manual page 4

Install the Network Card
The Model FA410TX Network Card is hot swappable, which means it can be inserted into a PC
that is either turned off or powered on.
1. Insert the Model FA410TX Network Card into the PCI slot as illustrated in the figure.
Some PCs have two PCI slots. The Model FA410TX Network Card can be inserted into
either slot.
2. Insert the RJ-45 adapter cable into the connector on the edge of the network card.
3. Turn on the power to the PC, if you have chosen to install the card with the power
turned off.
Model FA410TX
Network Card and
RJ-45 adapter
cable
Model FA410TX Network Card Installation Giude
8086FA