Physical Description; Front Panel; Figure 2-1. Front Panel Of The Model En516 Hub - NETGEAR EN516 Installation Manual

This chapter describes the hardware features of the Model EN516 hub. The discussion of the
physical components of the hub is divided into two sections, "Front Panel" and "Rear Panel." Use
the key at the bottom of each illustration to identify the associated component.

Front Panel

The front panel contains LEDs, 16 RJ-45 10BASE-T port connectors, and a Normal/Uplink push
button (Figure 2-1).
16
PORT
Ethernet Hub
10BASE-T
Key:
1 = LEDs (Power, BNC Rx, AUI Rx, Collision, BNC Partition, and AUI Partition)
2 = RJ-45 ports with Link/Rx and Partition LEDs on each port
3 = Normal/Uplink push button
Figure 2-1. Front panel of the Model EN516 hub

Physical Description

1
1
BNC AUI
Power
Rx Rx
Collision Partition Partition
9
Physical Description
2
Link/Rx Partition Link/Rx Partition
Chapter 2
3
MODEL EN516
8
Normal/Uplink
16
7432
2-1