Changing The Activated "Ready In" Time; Adding Laundry; Cancelling The Pro- Gramme; Resuming The Programme When The Programme Status Is Rinse Hold - Bosch WAN28286DN User Manual And Installation Instructions

en operation
13.9 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 22
Press .
1.
The activated "Ready in" time is
paused.
Press repeatedly until the dis-
2.
play indicates the desired "Ready
in" time.
Press .
3.
The changed "Ready in" time is ac-
tivated.
13.10 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press .
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press .
5.
13.11 Cancelling the pro-
gramme
Press .
1.
Open the door.
2.
30
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Skyl programme.
– If the water level is high, start
the Centrifugering programme
or select a suitable programme
for draining.
→ "Programmes", Page 23
Remove the laundry.
3.
→ "Unloading the laundry",
Page 30
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 22
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the Centrifugering programme
1.
or a programme for draining the
water.
→ "Programmes", Page 23
Press .
2.
13.13 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.14 Switching off the appli-
ance
Turn the programme selector to
1.
Fra.
Turn off the tap.
2.