The Router's Front Panel - NETGEAR WGT624 Reference Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3

The Router's Front Panel

The front panel of the WGT624 v3 wireless router contains the status LEDs described below.
Figure 2-1: WGT624 v3 Front Panel
You can use some of the LEDs to verify connections. Viewed from left to right,
describes the LEDs on the front panel of the router. These LEDs are green when lit.
Table 2-1. LED Descriptions
Label Activity
On
Off
Power
On
Blink
Internet
On
Wireless
On (Green)
Blink (Green)
On (Amber)
Local
Blink (Amber)
Off
2-6
Description
Power is supplied to the router.
Power is not supplied to the router.
The Internet (Wide Area Network) port has detected a link with an
attached device.
Data is being transmitted or received by the Internet port.
Indicates that the Wireless port is initialized.
The Local (LAN) port has detected link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
202-10090-01, April 2005
Table 2-1
Introduction