Coleman 8fa3 Instructions For Use Manual page 5

Assembly
cont.
Step 5
■ Turn the Base over.
■ Install legs to base. All Legs are
identical.
■ Do not install screws until Step 7.
Step 6
■ Turn Head Assembly over while
holding Lid closed.
■ Install screws and tighten.
(Actual size)
Step 7
■ Turn Head Assembly over while
holding lid closed.
■ Set Head Assembly on legs with
Handle positioned as shown.
■ Attach Collar to Head Assembly.
■ Align ribs on Collar with Ignitor.
Ribs
on
Collar
Ignitor
Handle
Grip
Step 7
cont.
(Actual size)
■ Install Tank Retainer at Leg
position opposite the Handle Grip.
■ Install Carriage Bolts, Washers, Nuts.
■ Install Retaining Screws at
bottom of Legs.
(Actual size)
■ Tighten Retaining Screws and
Nut on the Tank Retainer.
■ Unit is now pre-
pared for tank
installation.
Tank
Retainer
5