Table of Contents
Advertisement
Loading/Unloading the INSTAX WIDE™
Instant Film Pack
Caution
Do not open the film door until you have used up the film;
otherwise, the rest of the film will become exposed and turn
white� The film can no longer be used�
• When you load the film pack, never press the two rectangular
holes on the back of the film pack.
• Never use a film pack beyond its shelf life; otherwise, it may
damage the printer.
Use FUJIFILM INSTAX WIDE instant print film only. The
INSTAX SQUARE™ or INSTAX MINI™ instant print film cannot be
used.
Notes on the INSTAX WIDE instant film pack
• Each FUJIFILM INSTAX WIDE instant film pack contains one
black film protective cover and 10 film sheets.
• Do not remove the film pack from its inner bag until you are
ready to load it into the printer.
• The film cover is ejected automatically from the printer after
you close the film door.
For details, refer to the instructions and warnings on the
package of FUJIFILM INSTAX WIDE instant print film.
Loading the Film Pack
1
Slide and hold the film door lock and open the film
door.
2
Insert film pack by aligning the yellow marks�
3
Close the film door�
5
4
Remove the black film cover that is automatically
ejected�
The INSTAX LINK WIDE Smartphone printer is designed for use
with INSTAX WIDE instant print film only.
Unloading a Used Film Pack
1
Slide the film door lock and open the film door�
2
Grasp the rectangular holes on the film pack, then
pull film pack out from the printer�
Advertisement
Table of Contents
