Adjusting Bass; Adjusting Treble; Adjusting Loudness; Using Subwoofer Output - Pioneer KEH-P7035 Operation Manual

Section
Audio Adjustments
07

Adjusting bass

You can adjust the cut-off frequency and the
bass level.
! If SFEQ has been set to FRT1, bass adjust-
ment affects only the rear output: front out-
put cannot be adjusted.
1 Press AUDIO to select Bass.
Press AUDIO until Bass appears in the dis-
play.
2 Press c or d to select the desired fre-
quency.
Press c or d until the desired frequency ap-
pears in the display.
4063100160 (Hz)
3 Press a or b to adjust the bass level.
Each press of a or b increases or decreases
the bass level. +6  6 is displayed as the level
is increased or decreased.

Adjusting treble

You can adjust the cut-off frequency and the
treble level.
! If SFEQ has been set to FRT1 or FRT2, tre-
ble adjustment affects only the front out-
put: rear output cannot be adjusted.
1 Press AUDIO to select Treble.
Press AUDIO until Treble appears in the dis-
play.
2 Press c or d to select the desired fre-
quency.
Press c or d until the desired frequency ap-
pears in the display.
2.5k4k6.3k10k (Hz)
26
En
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com
3 Press a or b to adjust the treble level.
Each press of a or b increases or decreases
the treble level. +6  6 is displayed as the
level is increased or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select Loud.
Press AUDIO until Loud appears in the dis-
play.
2 Press a to turn loudness on.
Loudness level (e.g., Loud Mid) appears in the
display.
3 Press c or d to select a desired level.
Each press of c or d selects level in the fol-
lowing order:
Low (low)Mid (mid)Hi (high)
4 Press b to turn loudness off.
Loud OFF appears in the display.

Using subwoofer output

This unit is equipped with a subwoofer output
which can be turned on or off.
1 Press AUDIO to select Sub-W1.
Press AUDIO until Sub-W1 appears in the dis-
play.
# When the subwoofer controller setting is
S.W Control:EXT, you cannot select Sub-W1.
2 Press a to turn subwoofer output on.
Sub-W1 Normal appears in the display. Sub-
woofer output is now on.
# To turn subwoofer output off, press b.