Package Contents - NETGEAR ProSafe GS716T-200 Hardware Installation Manual

• Automatic address learning function to build the packet-forwarding information table. The
table contains up to 8K Media Access Control (MAC) addresses.
• Full-duplex and half-duplex functions for all 10/100/1000 Mbps ports.
• Store-and-Forward transmission to remove bad packets from the network.
• Full-duplex IEEE 802.3x pause frame flow control.
• Active flow control to minimize packet loss/frame drops.
• Half-duplex back-pressure control.
• Per port LEDs, System LEDs.
• Standard 1U high, rack-mountable 17-inch chassis.
• Fan speed control supported.

Package Contents

Figure 1-1 shows the package contents of the NETGEAR GS716T and GS724T Series Smart
Switch.
®
ProSafe 24 Port Gigabit Smart Switch
1 3 5 7 9 11 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
Reset PWR
Figure 1-1
Introduction
1 3 5 7 9
LINK/ACT
Green (1000M)
SPD
Yellow (100M)
FDX
LINK/ACT
SPD
FDX
2 4 6 8 10
v1.0, June 2009
GS716T/GS724T Hardware Installation Guide
11 13 15 17 19 21 23T
Link/
ACT
12 14 16 18 20 22 24T
MODEL
GS724T
23F 24F Auto ™
Link/ Uplink
ACT
Factory
Defaults
1-3