Physical Description; Gs110Tp Front And Back Panel Configuration - NETGEAR ProSafe GS110TP Hardware Installation Manual

This chapter describes the NETGEAR GS110TP Smart PoE Switch hardware features. Topics
include:
•

GS110TP Front and Back Panel Configuration

• LED Designations
• Device Hardware Interfaces
GS110TP Front and Back Panel Configuration
The GS110TP Smart PoE Switch has eight 10/100/1000 Mbps autosensing and two 1000 Mbps
SFP Gigabit Ethernet switching ports. Each RJ-45 port is capable of sensing the line speed and
negotiating the duplex mode with the link partner automatically.
Figure 2-1 illustrates the front panel of the NETGEAR GS110TP Smart PoE Switch:
Power/Status LED
PoE Max LED
Figure 2-1
The front panel contains the following:
• Eight RJ-45 connectors for 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports
• Two 1000M SFP Gigabit Ethernet switching ports
• Reset button to restart the device
• Recessed default reset button to restore the device back to the factory defaults
• Link, Speed, and Activity LEDs for each port
Link/Speed/ACT LEDs (left)
10/100/1000 Mbps Ethernet Ports
v1.0, March 2010
Chapter 2

Physical Description

PoE Status LEDs (right)
1000M SFP Ports
2-1